Author Topic: Release 0.40  (Read 2923 times)

0 Members and 1 Guest are viewing this topic.

Hyper

  • Administrator
  • Mission Commander
  • *****
  • Posts: 1247
Release 0.40
« on: January 04, 2020, 11:21:17 AM »
V 0.40 is posted live

So far this one is cleanup on Info text, mission requirements, UI elements not used.
Need to test changes to planters and dialog.
Suggestions from v0.39 have been added or fixed.
« Last Edit: January 09, 2020, 09:07:58 AM by Hyper »

AC_Black

  • Private
  • **
  • Posts: 14
Re: Release 0.40
« Reply #1 on: January 05, 2020, 11:26:55 PM »
Thankss Hyper will check back in tomorrow for new down load.

AC_Black

  • Private
  • **
  • Posts: 14
Re: Release 0.40
« Reply #2 on: January 09, 2020, 12:39:09 PM »
Testing drill sample.  farm mission

https://www.dropbox.com/s/upqpisww3npwpl6/console.log?dl=0

Just finished processing beans, clicked on table to put beans in inventory.

https://www.dropbox.com/s/ibrrosd5c17ylzi/console%20copy.log?dl=0

Both log files look rather clean. Will flag those spots and trace them.

I know after running this for a while we tend to drag and drop fast so when this fails do you remember being quick with your movements because in both cases it is the drop part that seems to fail. Like how long do you hover the mouse over the box before letting go? Might be object is not registered before the mouse release happens.
« Last Edit: January 10, 2020, 04:59:10 PM by Hyper »

LostMartian

  • MCCS Test
  • Captain
  • ******
  • Posts: 78
Re: Release 0.40
« Reply #3 on: January 10, 2020, 08:34:15 PM »
The separator for the hab module appears to handle water filtering correctly now. The slider works and no water mysteriously disappears when the tank is filled to the max. Unfortunately, when the tank is full and the slider returns to zero, it still shows the number the filter was on before. So if it was at 0.5, the slider will be moved to 0, but it'll still say 0.5.
Fixed

The separator for the farm module doesn't appear to have changed at all. The water slider gives wrong numbers for filter rates of 0.1 to 0.4 (such as 0.07 when it should have done 0.10). Filling the tank up to full still results in lost water. Its like the 2 separators don't share code at all.
Fixed
« Last Edit: January 14, 2020, 12:56:37 PM by Hyper »